the cheapest high quality tattoo machine supply: 2012

A tattoo machine to get his hand, to let us go to the adjustment of only the following links: before, after, after spring shrapnel, contact screw pitch, damping ring, the position of the coil, the rubber band, the armature. The coil, iron core, frame, capacitor basically we cannot move.

All adjustments are around two factors -- frequency and strength, I will be following the law of one.

Before the spring: length and width thickness hardness and bending angle will influence the frequency and power of machine. A long, narrow, thin, soft, bending angle low will let the machine frequency slow, force becomes larger. Contrary frequency becomes faster, smaller power.

Damping ring : the thickness of hard and soft, fine, soft for the frequencies of slow, force becomes larger. Vice versa. In fact, damping ring is a former shrapnel extension, good first shrapnel can even not damping ring, as former shrapnel power play to the maximum power, maximum.

Contact screw: the location of the point of contact more close to the front spring tip, frequency is slow, the greater strength, and vice versa. Contact screw pressure tighter frequency power smaller, faster. Recommended contact screw as before, touch shrapnel, at most, a two circle and backspin, so shrapnel its maximum power.

After the spring: width of hard and soft bending angle will influence the frequency of the machine, strength and the length of the needle. Narrow, thin, soft will let the machine frequency slow, force becomes larger. Contrary frequency becomes faster, smaller power. Bending angle is greater the longer the machine needle, the greater power, frequency is slower, and vice versa.

After the spacing: refers to the machine seat and armature of distance, the distance is altered after the spring length, can be achieved through several ways, adjustment armature length, elastic plate size, after after shrapnel, the forward three can be changed after the spacing. After the space between the greater strength, frequency is slower, and vice versa.

The position of the coil: front coil ( close to the needle of the coil ) is near the front of the greater strength, before and after the coil is greater the distance between the greater strength. Front coil as recommended by former, don't move after coil.

Armature the armature length: material, weight, the armature is longer, heavier greater strength, frequency is slow. The material is temporarily I only know better off magnetic armature.

Rubber band: with as little as possible, as long as can control the needle can be correctly installed beating, needle can reduce needle beats, so only need a two bands can be.

General case of thorn, totem color needs machine power, frequency of slow, thorn black and white traditional and sketch need machine strength small, fast frequency. We can according to the above rule to adjust suitable machine.

More tattoo machine products, please pay attention to this URL: http://www.tattoodiy.com/